A power spring, also called a clock spring or motor spring, is a flat strip wound into a spiral, usually inside a housing. Winding it stores energy that is released as torque over many turns, as in retractors, reels and spring motors.
Power springs (clock springs) for energy storage, rewind and automatic return mechanisms. Torque, turns and housing dimensions reviewed per project.
Flat spiral springs for energy storage, rewind, and automatic return mechanisms, commonly used in spring motors and retracting devices.
A power spring is a strip of hardened and tempered spring steel wound into a spiral and usually held in a case. Turning the arbor winds the strip onto it and stores energy; releasing the arbor lets the strip unwind back to the case wall and deliver torque over many turns.
Torque is not constant: it rises as the spring is wound and falls as it unwinds, with friction between the coils. Pre-winding the spring into a housing and using only the middle turns gives a flatter torque.
Power springs drive rewind and return functions:
Use these family-specific inputs to prepare a drawing review covering geometry, service conditions and acceptance. Final parameters are agreed for your project.
Yes — power spring, clock spring, motor spring and main spring all describe a flat strip wound into a spiral that stores energy as torque. In cars, "clock spring" also names the spiral cable inside the steering wheel that keeps the airbag connected; that is an electrical part, not a power spring.
Give the torque needed over the working turns (for example the torque at full wind and after a set number of turns released), the number of usable turns, the housing inside diameter, the arbor diameter, the strip width and thickness limits, the end attachments and the cycle life.
A power spring is wound tightly inside a housing and can deliver many turns of rotation. A spiral (flat spiral torsion) spring has space between its coils, works without a housing and is used over less than a few turns, usually as a return spring.
Share your drawing, working load, material and quantity. We will help define the next step toward a manufacturable spring.
