Wanjin Precision Spring

Company Profile

Company background, manufacturing routes and the information to review before sourcing.

Company Background References

Company materials trace Wanjin's predecessor to 1982 and list registration of the current company in April 2018. Wanjin is based in Fengjing Industrial Park, Huyi District, Xi'an, Shaanxi. Current company documents can be requested during supplier review.

  • Current company registration: Apr. 2018
  • Predecessor background: Company materials trace the predecessor to 1982; the current company was registered in April 2018. Current documents should be checked during supplier review.

Manufacturing scope

The process and equipment references below describe forming, finishing and inspection routes for spring projects. Installed equipment, achievable operating ranges and current calibration records should be confirmed for the specific part.

Equipment references explain the intended process. Confirm current configuration and suitability for your part during technical review.

  • Automatic Cold Coiling: Our cold-coiling window covers wire diameters from 0.1 mm to 10 mm for compression, extension, torsion, wire forms, and other precision elastic parts.
  • Medium-Freq. Hot Coiling: The highlighted hot-coiling window covers large-wire diameters from 14 mm to 50 mm for heavy-duty springs used in power equipment, heavy machinery, and demanding buffer applications.
  • Standards Reference (GB / ISO / JIS): GB, ISO and JIS are reference systems. The specific standard, edition and acceptance criteria are agreed for each drawing and application.
  • 5-50 tonf: Patent CN103604590B describes a spring strength and fatigue test rig designed for 5–50 tonf. Project test feasibility, fixtures and current equipment availability require confirmation.

Quality Control

Supplier qualification should confirm current quality-system documents and their scope. Applicable GB, ISO or JIS standards, inspection plans and acceptance criteria are agreed for each drawing and application.

Agree the applicable quality documents, traceability records, sampling and acceptance criteria during supplier qualification. Current certificate scope and validity require documentary confirmation.

Products

19 industrial spring families: compression, torsion, extension, die, wave and disc springs, retaining rings, constant force springs and wire forms.

  • Heavy Duty Compression Springs, Hot Coiled — A hot coil spring is a helical spring wound from steel bar that has been heated, typically to about 850–950 °C, so that large diameters can be formed, and then quenched and tempered.
  • Stacked Disc Spring Assemblies — A disc spring stack is a set of conical disc springs (Belleville washers) arranged in series to increase deflection, in parallel to increase load, or in combination to tune the load–deflection curve.
  • Die Springs — A die spring is a heavy duty compression spring wound from rectangular (flat-sided) wire.
  • Compression Springs — A compression spring is an open-coil helical spring that resists a compressive load and pushes back as it is shortened.
  • Extension Springs — An extension spring is a close-wound helical spring that resists pulling.
  • Torsion Springs — A torsion spring is a helical spring loaded by rotating its legs about the coil axis; it stores energy as torque rather than axial force.
  • Wave Springs & Wave Spring Washers — A wave spring is a compression spring made from flat wire formed with waves around its circumference.
  • Contact Springs — A contact spring maintains a defined contact force between conductive parts so that electrical resistance stays stable as parts wear, heat up or vibrate.
  • Retaining Rings, Snap Rings & Circlips — A retaining ring — also called a circlip or snap ring — is a spring-steel fastener that sits in a groove to locate parts axially on a shaft (external ring) or in a bore (internal ring).
  • Custom Wire Forms & Wire Forming — A wire form is a part bent from spring or carbon wire into a functional shape — clips, hooks, brackets, levers or spring-loaded retainers — rather than a uniform coil.
  • Constant Force Springs — A constant force spring is a pre-stressed flat strip coiled tightly on itself.
  • Garter Springs — A garter spring is a long close-coiled spring joined end to end to form a ring.
  • Flat Springs — A flat spring is formed from strip or sheet rather than round wire.
  • Power / Clock Springs — A power spring, also called a clock spring or motor spring, is a flat strip wound into a spiral, usually inside a housing.
  • Variable Force Springs — A variable force spring is a strip spring whose force changes in a designed way as it is extended — rising or falling along the travel — usually by tapering the strip width or thickness.
  • Spiral Springs — A spiral spring, or flat spiral torsion spring, is a strip wound in a plane with space between the coils.
  • Contact Clips / Leaf-Type Elastic Parts — Contact clips are stamped or formed spring parts — leaf springs, battery contacts, grounding clips and spring clips — that clamp, latch or conduct current.
  • Multi-Turn Wave Spring Assemblies — A multi-turn wave spring stacks several waved turns of flat wire crest-to-crest in one continuous coil.
  • Belleville Spring Washers & Disc Springs — A disc spring, also called a Belleville washer or Belleville spring, is a conical annular disc that flattens under axial load.

Start with a reviewable project brief.

A drawing or sample starts the discussion. Add the operating conditions and acceptance requirements so the team can assess the next step.