Stacked Disc Spring Assemblies

A disc spring stack is a set of conical disc springs (Belleville washers) arranged in series to increase deflection, in parallel to increase load, or in combination to tune the load–deflection curve. Stacks are common in circuit-breaker operating mechanisms, bolted-joint preload, clamping units and heavy buffers.

Product Overview and Project Fit

Stacked disc spring assemblies in series, parallel or combined arrangements for high-load, short-stroke clamping and power equipment, reviewed per drawing.

Disc springs arranged in series, parallel, or combined stacks to achieve higher loads and tuned load-deflection behavior for heavy-duty clamping and damping systems.

  • High Load
  • Compact
  • Fatigue Res.

Applications

  • Power Industry
  • Heavy Ind.

Processes

  • Load Testing
  • Testing

Drawing inputs to confirm

Use these family-specific inputs to prepare a drawing review covering geometry, service conditions and acceptance. Final parameters are agreed for your project.

  • Outside/inside diameter, thickness and cone height
  • Working height and load points; series/parallel stack arrangement where applicable
  • Guide clearance, installation direction, lubrication and acceptance method

FAQ

Series vs parallel disc spring stacking — what changes?

Discs stacked in series (alternating direction) multiply deflection at the same load. Discs stacked in parallel (same direction) multiply load at the same deflection and add friction between discs. Combined stacks mix both. Guiding, friction and tolerance stack-up are checked for each assembly.

How long can a disc spring stack be?

Keep the stack length to about three times the outside diameter or less so every disc deflects evenly. Longer stacks need to be split into guided sections with hardened intermediate washers.

How do I calculate a disc spring stack?

Calculate one disc with the DIN 2092 / EN 16984 load formula, then multiply the load by the number of discs in parallel and the deflection by the number of series groups. The free Wanjin calculator has a disc spring mode that does this and also reports stress.

Related Articles and Selection Guides

Contact Us

Share your drawing, working load, material and quantity. We will help define the next step toward a manufacturable spring.

Stacked Disc Spring Assemblies
Stacked Disc Spring Assemblies · Wanjin Precision Spring