Types of Springs: 16 Common Types and How to Choose One
Author: Jenny Xu
Published: Nov 10, 2026
Updated: Nov 10, 2026
Springs are classified by how they are loaded. Compression springs are pushed shorter, extension springs are pulled longer, torsion springs are twisted, and flat or strip springs bend or unroll. Within each group, the shape and material are chosen to fit the space, the force curve and the operating environment.
The 16 common types of springs
| Spring type | How it works | Typical use |
|---|---|---|
| Compression spring | Open coils shorten under a push | Valves, machinery, switches |
| Extension spring | Close-wound coils lengthen under a pull | Doors, latches, counterbalances |
| Torsion spring | Coil twists about its axis and returns torque through its legs | Hinges, clamps, covers |
| Die spring | Compression spring in rectangular wire, for more load in the same space | Stamping dies, molds |
| Conical or barrel spring | Compression spring with tapered coils | Short solid height, stable seating |
| Hot coil spring | Steel bar coiled hot, then quenched and tempered | Rail, mining, heavy machinery |
| Disc spring (Belleville washer) | Conical disc flattens under axial load | High load in a short stroke |
| Wave spring | Flat wire with waves compresses axially | Bearing preload, tight axial space |
| Constant force spring | Pre-stressed strip unrolls at near-constant force | Counterbalance, cable retraction |
| Power spring | Strip wound in a spiral stores torque | Clock and rewind mechanisms |
| Spiral spring | Flat spiral with space between the coils | Limited-angle return |
| Flat spring | Strip bends like a small beam | Latches, contacts, clips |
| Garter spring | Long coil joined into a ring | Oil seals, radial preload |
| Contact spring | Holds a defined force between conductive parts | Switchgear, connectors |
| Retaining ring | Spring-steel ring seated in a groove | Axial location on shafts and in bores |
| Wire form | Wire bent into a functional shape | Clips, hooks, brackets |
Coil springs: compression, extension and torsion
Most springs are helical coils wound from round wire. A compression spring has gaps between its coils and shortens until the coils touch. An extension spring is wound with its coils touching, often with built-in initial tension, and has hooks or loops at the ends. A torsion spring is loaded by rotating its legs around the coil axis, so it delivers torque rather than a straight-line force.
The wire is twisted in compression and extension springs and bent in a torsion spring, which is why their formulas differ. The spring constant guide covers each one.
Springs for high load or little space
When axial space is short, a coil spring often cannot fit. A disc spring carries very high load over a short stroke, and discs can be stacked in series for more travel or in parallel for more load. A wave spring reaches a working load at a lower compressed height than a comparable coil spring, which makes it common for bearing preload. Loads beyond the range of cold coiling go to hot coil springs made from steel bar.
Strip springs: constant force, power, spiral and flat
Springs made from flat strip store energy by bending. A constant force spring delivers nearly the same force over its whole extension, while a variable force spring changes its force along the travel by tapering the strip. Power springs and spiral springs store torque in a spiral. Flat springs and contact clips are stamped and formed to suit one assembly.
How to choose a spring type
Five questions narrow the choice quickly:
- Motion: is the load a push, a pull or a rotation?
- Space: how much length and diameter are available at maximum compression or extension?
- Force curve: should force rise steadily, stay constant, or rise faster near the end of travel?
- Environment: what temperature, corrosive media or electrical requirements apply? The spring material guide compares common grades.
- Life: how many cycles are required, and is the load static or shock?
Wanjin makes 19 spring families to customer drawings, with cold coiling for 0.1–10 mm wire and hot coiling for 14–50 mm bar. Use the spring rate calculator for a first estimate, or send a drawing or sample for review.
Key Takeaways
- Springs are grouped by load: push, pull, twist, or bending and unrolling of strip.
- Disc and wave springs suit short axial space; hot coil springs suit loads beyond cold coiling.
- Motion, space, force curve, environment and life decide the type.