Hooke's Law for Springs: Force Formula and Potential Energy
Hooke's law F = −kx applied to real springs: the spring force formula, elastic potential energy, worked examples in N/mm and lbf/in, and where the law stops holding.
Spring engineering and sourcing articles on this topic, with practical guidance for drawing review, spring selection and supplier discussions. Compression Springs.
Hooke's law F = −kx applied to real springs: the spring force formula, elastic potential energy, worked examples in N/mm and lbf/in, and where the law stops holding.
How to combine spring constants in series and in parallel, with worked examples, dual-rate springs, nested springs and disc spring stacks.
Why designers taper a compression spring, how the rate changes as coils bottom out, a rate formula with a worked example, and what to put on the drawing.
How to measure compression, extension and torsion springs for a replacement or a quote, including coil counting, end types and spring rate.
What the spring constant means, how to convert N/mm and lbf/in, how to find k by test or from dimensions, and when a spring stops being linear.
A plain guide to compression, extension, torsion, disc, wave, constant force and other spring types, with a comparison table and five selection questions.