Industrial springs: compression, torsion, die, wave & disc

Explore custom spring manufacturing capabilities across compression springs, extension springs, torsion springs, wave springs, retaining rings, wire forms, and large-wire hot coil production for OEM and industrial sourcing.

Heavy Duty

  • Heavy Duty Compression Springs, Hot Coiled — A hot coil spring is a helical spring wound from steel bar that has been heated, typically to about 850–950 °C, so that large diameters can be formed, and then quenched and tempered.
  • Stacked Disc Spring Assemblies — A disc spring stack is a set of conical disc springs (Belleville washers) arranged in series to increase deflection, in parallel to increase load, or in combination to tune the load–deflection curve.

Precision

  • Die Springs — A die spring is a heavy duty compression spring wound from rectangular (flat-sided) wire.
  • Wave Springs & Wave Spring Washers — A wave spring is a compression spring made from flat wire formed with waves around its circumference.
  • Contact Springs — A contact spring maintains a defined contact force between conductive parts so that electrical resistance stays stable as parts wear, heat up or vibrate.
  • Garter Springs — A garter spring is a long close-coiled spring joined end to end to form a ring.
  • Flat Springs — A flat spring is formed from strip or sheet rather than round wire.
  • Contact Clips / Leaf-Type Elastic Parts — Contact clips are stamped or formed spring parts — leaf springs, battery contacts, grounding clips and spring clips — that clamp, latch or conduct current.
  • Multi-Turn Wave Spring Assemblies — A multi-turn wave spring stacks several waved turns of flat wire crest-to-crest in one continuous coil.
  • Belleville Spring Washers & Disc Springs — A disc spring, also called a Belleville washer or Belleville spring, is a conical annular disc that flattens under axial load.

General

  • Compression Springs — A compression spring is an open-coil helical spring that resists a compressive load and pushes back as it is shortened.
  • Extension Springs — An extension spring is a close-wound helical spring that resists pulling.
  • Torsion Springs — A torsion spring is a helical spring loaded by rotating its legs about the coil axis; it stores energy as torque rather than axial force.

Custom

  • Retaining Rings, Snap Rings & Circlips — A retaining ring — also called a circlip or snap ring — is a spring-steel fastener that sits in a groove to locate parts axially on a shaft (external ring) or in a bore (internal ring).
  • Custom Wire Forms & Wire Forming — A wire form is a part bent from spring or carbon wire into a functional shape — clips, hooks, brackets, levers or spring-loaded retainers — rather than a uniform coil.
  • Constant Force Springs — A constant force spring is a pre-stressed flat strip coiled tightly on itself.
  • Power / Clock Springs — A power spring, also called a clock spring or motor spring, is a flat strip wound into a spiral, usually inside a housing.
  • Variable Force Springs — A variable force spring is a strip spring whose force changes in a designed way as it is extended — rising or falling along the travel — usually by tapering the strip width or thickness.
  • Spiral Springs — A spiral spring, or flat spiral torsion spring, is a strip wound in a plane with space between the coils.

Capability Envelope and Key Parameters

See our manufacturing range, validation scope, and project coverage at a glance to judge capability fit before narrowing to a specific spring type.

  • Automatic Cold Coiling: Our cold-coiling window covers wire diameters from 0.1 mm to 10 mm for compression, extension, torsion, wire forms, and other precision elastic parts.
  • Medium-Freq. Hot Coiling: The highlighted hot-coiling window covers large-wire diameters from 14 mm to 50 mm for heavy-duty springs used in power equipment, heavy machinery, and demanding buffer applications.
  • Standards Reference (GB / ISO / JIS): GB, ISO and JIS are reference systems. The specific standard, edition and acceptance criteria are agreed for each drawing and application.
  • 5-50 tonf: Patent CN103604590B describes a spring strength and fatigue test rig designed for 5–50 tonf. Project test feasibility, fixtures and current equipment availability require confirmation.

Selection Guides Related to These Products

Spring rate calculator: check a design in seconds

Enter wire diameter, outside diameter and coils to estimate spring rate, load, Wahl-corrected stress and solid height for compression springs or torque per degree for torsion springs, or check Belleville disc spring load and stress. Free, in mm or inches.

Contact Us

Share your drawing, working load, material and quantity. We will help define the next step toward a manufacturable spring.