Spring Washers: Belleville, Wave, Curved and Split Types Compared
Author: Jenny Xu
Published: Nov 10, 2026
Updated: Nov 10, 2026
A spring washer is a washer that deflects elastically under axial load, so it keeps force on a joint or takes up axial play. The common forms are Belleville (conical), wave, curved and split lock washers. Belleville washers give the highest load for their size, and wave washers give light preload in very little height.
Spring washer types compared
| Type | Shape | Load and stroke | Typical use | Standard |
|---|---|---|---|---|
| Belleville washer / disc spring | Conical disc | High load, short stroke | Clamping, valves, power equipment | DIN 2093 / EN 16983 |
| Conical washer for bolted joints | Conical disc | Holds bolt preload | Bolted joints | DIN 6796 |
| Wave washer | Ring with three or more waves | Light to medium load, low height | Bearing preload, axial play | DIN 137 form B |
| Curved washer | Ring with one bow | Very light load | Taking up small play | DIN 137 form A |
| Split lock washer | Split helical ring | Little working load | General fasteners | DIN 127, since withdrawn |
Belleville washers or wave washers?
Choose a Belleville washer when load matters more than travel. It can carry far more force than a wave washer of the same diameter, and its load curve can be tuned through the ratio of cone height to thickness. Discs can be stacked: in series for more deflection, in parallel for more load.
Choose a wave washer when axial space is the limit and the load is modest, such as removing bearing play. Spring force rises with the number of waves, but more waves leave less usable deflection. Three waves is the practical minimum for the washer to sit flat and square. For longer travel, multi-turn wave springs stack several wavy turns in one continuous coil.
Wave washers are made with a gap between the ends or with overlapping ends. Overlapping ends keep the ring continuous and spread the load more evenly around the circumference; gap ends are simpler and allow the diameter to grow as the washer flattens.
Do split lock washers stop bolts loosening?
Usually not in a properly tightened joint. A split lock washer flattens completely at normal bolt preload, so it adds little spring action, and transverse vibration tests show little benefit against self-loosening. The more reliable measures are correct preload, longer grip length, and locking features designed for vibration. DIN 6796 conical washers serve a different purpose: they help maintain preload when the joint settles. Wanjin's catalog covers disc springs and wave springs and does not list split lock washers.
What to specify for a custom spring washer
- Inner and outer diameters, and the shaft or bore they must clear
- Thickness and free height
- Load at one or more working heights
- For wave washers, the number of waves and end style
- Material, finish and operating temperature
- Static or cyclic duty, with the required cycle count
Wanjin reviews disc springs and wave springs against customer drawings. The disc spring mode of the calculator gives a first load estimate to DIN 2092 / EN 16984. To start a review, send your drawing.
Key Takeaways
- Belleville washers give the most load for their size; wave washers give light preload in very little height.
- More waves raise the load but reduce usable deflection.
- Split lock washers flatten at normal preload and add little resistance to self-loosening.