When Should You Use Wave Springs Instead of Coil Springs?

Author: Jenny Xu

Published: Mar 25, 2026

Updated: Mar 28, 2026

Wave springs are usually the better choice when the assembly has very little axial space but still needs controlled preload. Bearing stacks, compact gearboxes, valve modules, and small electromechanical devices often benefit because a wave spring can deliver force with a much lower installed height than a comparable round-wire coil spring.

Round-wire compression springs may be suitable when the required travel or load is better matched by an available coil design. Wave-spring designs also vary in travel and load, so compare the actual force-deflection curves, installed heights and guidance requirements. Neither family should be assumed to tolerate side load or contamination without application review.

The real comparison should start from installed height, target force range, friction sensitivity, and assembly method. If the design depends on low stack height and stable preload, a wave spring can simplify the package. If the design depends on long travel and forgiving operation, a conventional coil spring is often the safer answer.

One more check is tolerance behavior around the spring. Wave springs react strongly to seat flatness, groove depth, and neighboring part stack-up, while coil springs react more to buckling margin and solid-height clearance. If the housing tolerances are loose, the apparent space-saving benefit of a wave spring can disappear in production variation.

Related spring types

Related Posts

Tags