How Do Hot-Coiled and Cold-Coiled Springs Differ in Performance?
Author: Jenny Xu
Published: Aug 1, 2025
Updated: Mar 28, 2026
Cold coiling is often considered for smaller wire sections and detailed coil geometries. Existing Wanjin company materials reference a 0.1–10 mm cold-coiling range. This is a process reference rather than a guarantee for every compression, extension or torsion spring; formed contact parts require their own route review.
Hot coiling is an option when material and geometry exceed the practical limits of cold forming. Wanjin company materials reference a 14–50 mm hot-coiling range. Confirm the actual part and current process availability, including heating, forming, trimming and heat treatment, before choosing a route.
The process difference also changes downstream quality control. Cold-coiled springs are usually reviewed for dimensional repeatability, end geometry, and load consistency tied to accurate wire control. Hot-coiled springs place more emphasis on thermal history, decarburization risk, grinding allowance, presetting behavior, and heavy-load verification after finishing.
Buyers should therefore avoid asking only whether a supplier can “make the spring.” A stronger question is whether the supplier runs the correct coiling route for the size and duty, and whether the inspection plan matches that route. The wrong process may still produce a sample, but it rarely produces a stable batch.